H3C S3610-28P Operation Manual page 1112

Operation Manual – QoS
H3C S3610&S5510 Series Ethernet Switches
8.2.2 Configuration Procedure
Follow these steps to apply VLAN policies:
To do...
Enter system view
Apply the VLAN
policy to specified
VLANs
Note:
The QoS policy applied to a port overrides the QoS policy applied to the VLAN the port
belongs to.
8.3 Displaying and Maintaining VLAN Policy
Display the VLAN policy
Clear the statistics
information about the
VLAN policy
8.4 VLAN Policy Configuration Examples
8.4.1 Network Requirements
The VLAN policy named test is defined to perform traffic policing for the packets
matching basic IPv4 ACL 2000, with CIR as 64 kbps.
Apply the VLAN policy test to the inbound direction of VLAN 200, VLAN 300,
VLAN 400, VLAN 500, VLAN 600, VLAN 700, VLAN 800, and VLAN 900.
8.4.2 Configuration Procedure
# Enter system view.
<Sysname> system-view
Use the command...
system-view
qos vlan-policy
policy-name vlan
vlan-id-list inbound
To do...
display qos vlan-policy
{ name policy-name | vlan
[ vlan-id ] }
reset qos vlan-policy [ vlan
vlan-id ]
Chapter 8 VLAN Policy Configuration
—
Required
You can provide the vlan-id-list
argument in the form of vlan-id to
vlan-id or provide multiple VLAN IDs
for the argument. Up to eight VLAN
IDs are allowed.
Use the command...
8-2
Remarks
Remarks
Available in any view
Available in user view