Outputting Log Information To The Console - H3C S3610-28P Operation Manual

Operation Manual – Information Center
H3C S3610&S5510 Series Ethernet Switches
# syslogd -r &
Note:
Ensure that the syslogd process is started with the -r option on a Linux log host.
After the above configurations, the system will be able to keep log information in the
related file.

1.4.3 Outputting Log Information to the Console

I. Network requirements
Log information with a severity higher than informational will be output to the
console;
The source modules are ARP and IP.
II. Network diagram
Figure 1-3 Network diagram for sending log information to the console
III. Configuration procedure
# Enable information center.
<Sysname> system-view
[Sysname] info-center enable
# Specify the channel to output log information to the console (optional, Console by
default).
[Sysname] info-center console channel console
# Disable the output of log, trap, and debug information of all modules to the log host.
[Sysname] info-center source default channel console debug state off log state
off trap state off
Chapter 1 Information Center Configuration
1-19