Command Line Error Information - H3C S3610-28P Operation Manual

Operation Manual – System Maintaining and Debugging
H3C S3610&S5510 Series Ethernet Switches
Follow these steps to access history commands:
View the history
commands
Access the previous
history command
Access the next history
command
Note:
You may use arrow keys to access history commands in Windows 200X and XP
Terminal or Telnet. However, the up-arrow and down-arrow keys are invalid in
Windows 9X HyperTerminal, because they are defined in a different way. You can use
<Ctrl+P> and <Ctrl+N> instead.

1.2.5 Command Line Error Information

The commands are executed only if they have no syntax error. Otherwise, error
information is reported.
Table 1-5 Common command line errors
% Unrecognized command found at '^'
position.
% Incomplete command found at '^'
position.
% Ambiguous command found at '^'
position.
Too many parameters
% Wrong parameter found at '^' position.
To do... Use the key/command...
display
history-command
Up-arrow key or <Ctrl+P>
Down-arrow key or
<Ctrl+N>
Table 1-5
Error information
lists some common errors.
The command was not found.
The keyword was not found.
Parameter type error
The parameter value is beyond the
allowed range.
Incomplete command
Ambiguous command,
Too many parameters
Wrong parameter
1-14
Chapter 1 Basic Configurations
Result
Displays the commands
that you have entered
Displays the earlier
history command, if there
is any.
Displays the next history
command, if there is any.
Cause