H3C S3610-28P Operation Manual page 619

Operation Manual – IPv6 Routing
H3C S3610&S5510 Series Ethernet Switches
4.3 Configuring IPv6 IS-IS Routing Information Control
4.3.1 Configuration Prerequisites
You need to complete the IPv6 IS-IS basic function configuration before configuring this
task.
4.3.2 Configuration Procedure
Follow these steps to configure IPv6 IS-IS routing information control:
Enter system view
Enter IS-IS view
Define the priority for IPv6
IS-IS routes
Configure an IPv6 IS-IS
summary route
Generate an IPv6 IS-IS
default route
Configure IPv6 IS-IS to
filter incoming routes
Configure IPv6 IS-IS to
redistribute routes from
another routing protocol
To do...
system-view
isis [ process-id ]
[ vpn-instance
vpn-instance-name ]
ipv6 preference
{ route-policy
route-policy-name |
preference } *
ipv6 summary
ipv6-prefix prefix-length
[ avoid-feedback |
generate_null0_route |
[ level-1 | level-1-2 |
level-2 ] | tag tag ] *
ipv6
default-route-advertise
[ [ level-1 | level-2 |
level-1-2 ] | route-policy
route-policy-name ]*
ipv6 filter-policy
{ acl6-number |
ipv6-prefix
ipv6-prefix-name |
route-policy
route-policy-name }
import
ipv6 import-route
protocol [ process-id ]
[ allow-ibgp ] [ cost
cost-value | [ level-1 |
level-2 | level-1-2 ] |
route-policy
route-policy-name | tag
tag-value ] *
Chapter 4 IPv6 IS-IS Configuration
Use command to...
4-3
Remarks
––
––
Optional
15 by default
Optional
Not configured by default
Optional
No IPv6 default route is
defined by default.
Optional
No filtering policy is
defined by default
Optional
Not configured by default