H3C S3610-28P Operation Manual page 1329

Operation Manual – NQA
H3C S3610&S5510 Series Ethernet Switches
Configure the number of
probes in a test
Configure the NQA probe
time-out time
Configure the maximum
number of history records
that can be saved in a
test group
Configure the maximum
number of hops a test
request packet traverses
in the network
Configure the ToS field in
an IP packet header
To do... Use the command...
count times
timeout time
history-records
number
ttl number
tos value
Optional
1 by default. For the TCP
test, a probe means a
connection. For the jitter test,
the number of test packets
sent in a probe is determined
by the jitter-packetnum
command. For the SNMP
test, three test packets are
sent in a probe. For the other
tests, one test packet is sent
in a probe.
Optional
Three seconds by default. If
no response packet is
received within the time-out
time of a request packet, the
probe fails.
Optional
50 by default If the number of
history records exceeds this
value, the earliest test
results are discarded.
Optional
20 by default.
This command is invalid for
the DHCP test.
Optional
0 by default.
This command is invalid for
the DHCP test.
1-28
Chapter 1 NQA Configuration
Remarks