H3C S3610-28P Operation Manual page 947

Operation Manual – AAA-RADIUS-HWTACACS
H3C S3610&S5510 Series Ethernet Switches
server with an IP address configured. If the secondary server is reachable, the
primary server will resume active after the period specified by this timer, and the
secondary server's state does not change.
Real-time accounting interval (realtime-accounting): This timer defines the
interval for performing real-time accounting of users. After this timer is set, the
switch will send accounting information of online users to the RADIUS server at
the specified interval.
Follow these steps to set timers regarding RADIUS servers:
Enter system view
Create a RADIUS scheme
and enter RADIUS
scheme view
Set the RADIUS server
response timeout timer
Set the quiet timer for the
primary server
Set the real-time
accounting interval
Note:
The product of the maximum number of retransmission attempts of RADIUS
packets and the RADIUS server response timeout period cannot be greater than 75.
This product is also the upper limit of the timeout time of different access modules.
For an access module, the product of the RADIUS server response timeout period
and the maximum number of retransmission attempts must be smaller than the
timeout time.
To configure the maximum number of retransmission attempts of RADIUS packets,
refer to the command retry in the command manual.
1.4.10 Configuring RADIUS Accounting-on
With the accounting-on function enabled, a device sends, whenever it reboots,
accounting-on packets to the RADIUS server, requesting the server to force its users
offline.
Once configured, the accounting-on function is executed as soon as the device restarts
and completes its configuration. In case that the majority of the RADIUS servers (a
To do...
system-view
radius scheme
radius-scheme-name
timer response-timeout
seconds
timer quiet minutes
timer
realtime-accounting
minutes
Chapter 1 AAA/RADIUS/HWTACACS
Use the command...
1-31
Configuration
Remarks
—
Required
Not defined by default
Optional
3 seconds by default
Optional
5 minutes by default
Optional
12 minutes by default