Ipv6 Bgp Route Reflector Configuration - H3C S3610-28P Operation Manual

Operation Manual – IPv6 Routing
H3C S3610&S5510 Series Ethernet Switches
Peer
10::2
9:3::2
9:1::2
# Display IPv6 peer information on Switch C.
[SwitchC] display bgp ipv6 peer
BGP local router ID : 3.3.3.3
Local AS number : 65009
Total number of peers : 2
Peer
9:3::1
9:2::2
Switch A and B established an EBGP connection; Switch B, C and D established IBGP
connections with each other.

5.9.2 IPv6 BGP Route Reflector Configuration

I. Network requirements
Switch B receives an EBGP update and sends it to Switch C, which is configured as a
route reflector with two clients: Switch B and Switch D.
Switch B and Switch D need not establish an IBGP connection because Switch C
reflects updates between them.
II. Network diagram
Figure 5-2 Network diagram for IPv6 BGP route reflector configuration
V AS MsgRcvd MsgSent
4 65008 3
4 65009 2
4 65009 2
V AS MsgRcvd MsgSent
4 65009 4
4 65009 4
5-26
Chapter 5 IPv6 BGP Configuration
OutQ PrefRcv Up/Down
3 0 0 00:01:16 Established
3 0 0 00:00:40 Established
4 0 0 00:00:19 Established
Peers in established state : 2
OutQ PrefRcv Up/Down
4 0 0 00:02:18 Established
5 0 0 00:01:52 Established
State
State