Configuring Route Exchange Between A Mce And A Site - H3C S3610-28P Operation Manual

Operation Manual – MCE
H3C S3610&S5510 Series Ethernet Switches
Configure the maximum
number of routes a VPN
instance can
accommodate
Apply a route policy for
the routes received
Apply a route policy for
the routes to be
advertised
Note:
This attribute can be advertised with a route only when BGP runs between the MCE
and the PE. Otherwise, this attribute is of no sense.
The VPN target specified for a VPN instance on the MCE device must be same as
that specified for the VPN instance on the PE device.

2.2 Configuring Route Exchange between a MCE and a Site

2.2.1 Configuring Route Exchange between a MCE and a Site
Table 2-6 Configure route exchange between a MCE and a site
Configure to use static
routes between a MCE and
a site
Configure to use RIP
between a MCE and a site
Configure to use OSPF
between a MCE and a site
Configure to use IS-IS
between a MCE and a site
Configure to use EBGP
between a MCE and a site
Operation
routing-table limit
number { warn-threshold |
simply-alert }
import route-policy
route-policy
export route-policy
route-policy
Operation
Command
Description
See
Static Routes between a MCE and
a Site"
See
Static Routes between a MCE and
You can
a Site"
choose one or
multiple
See
configurations
OSPF between a MCE and a
as required.
See
IS-IS between a MCE and a
See
EBGP between a MCE and a
2-4
Chapter 2 MCE Configuration
Description
Optional
Not configured by default
Optional
By default, all routes
matching the VPN target
attribute are permitted.
Optional
By default, all routes
matching the VPN target
attribute are permitted.
Related section
2.2.2 "Configuring to Use
2.2.3 "Configuring to Use
2.2.4 "Configuring to Use
2.2.5 "Configuring to Use
2.2.6 "Configuring to Use
Site"
Site"
Site"