User Guidelines
NOTE: This command is only available on N40xx series switches.
This command has no user guidelines.
Examples
console# show lldp tlv-select interface te1/0/1
Interface
ETS Config
------------ ----------
te1/0/1
Yes
console# show lldp tlv-select interface all
Interface
ETS Config
----------- ----------
te1/0/1
Yes
te1/0/2
No
show lldp dcbx
Use the show lldp dcbx command to display the Traffic Class to Traffic Class
Group mapping.
Syntax
show lldp dcbx [interface [all|interface-id detail|status]]
•
interface-id—A valid physical interface specifier.
•
all—All interfaces.
•
detail—Display detailed DCBX information.
•
status—Display a status summary.
Default Configuration
This command has no default setting.
Command Mode
Privileged Exec
User Guidelines
NOTE: This command is only available on N40xx series switches.
ETS Recommend
PFC
-------------
---
No
Yes
ETS Recommend
PFC
-------------
---
No
Yes
No
Yes
Data Center Technology Commands
App Priority QCN
------------ ---
No
Yes
App Priority QCN
------------ ---
No
Yes
No
Yes
1144