Group Configuration - Dell N1100-ON Reference Manual

Field
Max-Bandwidth
Scheduler Type
Weight Percentage The weight of the TCG used during non-strict scheduling.
Example
The following example demonstrates how to display the global traffic class

group configuration:

s1# show interfaces traffic-class-group
Global Configuration
TCG Id Min.
Bandwidth
------- ----------
0 0
1 0
2 0
Description
The maximum transmission bandwidth g, expressed as a
percentage. A value of 0 means no upper limit is enforced, so
the queue may use any or all of the available bandwidth of the
interface. This is a configured value.
Indicates whether this queue is scheduled for transmission
using a strict priority or a weighted scheme. Strict priority
scheduler is to provide lower latency to the higher CoS classes
of traffic. Weighted scheduling is a round robin mechanism
with weights associated to each CoS class of traffic. This is a
configured value.
Max Scheduler
Bandwidth Type
--------- ---------
0 Strict
0 WDRR
0 WDRR
Data Center Technology Commands
Weight
Percentage
----------
0
50
50
1159