Dell N1100-ON Reference Manual page 1124

Grandmaster Change
Count
Last Grandmaster Change
Timestamp
The following information is displayed for the interface command.
Field
Intf
Mode
asCapable
measuringPdelay
Pdelay
Role
Pdelay Threshold
Pdelay lost responses
allowed
Neighbor Rate Ratio
Initial Pdelay interval
Initial Announce Interval
Specifies the number of GM change events occurred.
Specifies the timestamp of the last GM change event.
Description
Slot/port
IEEE 802.1AS interface admin mode (enabled/disabled)
Indicates if the interface is asCapable.
Indicates if the interface is measuring PDELAY.
Indicates the value of the propagation delay on this
interface.
Indicates one of the IEEE 802.1AS port roles
(MASTER, SLAVE, PASSIVE, DISABLED)
Specifies the propagation delay threshold in
nanoseconds, above which an interface is not considered
capable of participating in the AS protocol.
Specifies the number of Pdelay_Req messages for which
a valid response is not received, above which a port is
considered to not be exchanging peer delay messages
with its neighbor.
Specifies an estimate of the ratio of the frequency of the
LocalClock entity of the time-aware system at the other
end of the link attached to this port, to the frequency of
the LocalClock entity of this time-aware system.
Specifies the configured mean time interval between
successive PDELAY_REQ messages sent over a link, in
logarithm to base 2 format.
Specifies the configured mean time interval between
successive ANNOUNCE messages in logarithm to base
2 format.
Audio Visual Bridging Commands
1124