Configuration Examples For Smart Licensing; Example: Viewing The Call Home Profile - Cisco Catalyst 9200 Configuration Manual

Configuring Smart Licensing
Command
show license all
show tech-support license
show license usage
show license summary

Configuration Examples for Smart Licensing

The following sections provide various Smart Licensing configuration examples.

Example: Viewing the Call Home Profile

Example
To display the Call Home profile, use the show call-home profile all command:
Device> enable
Device# show call-home profile all
Profile Name: CiscoTAC-1
Profile status: ACTIVE
Profile mode: Full Reporting
Reporting Data: Smart Call Home, Smart Licensing
Preferred Message Format: xml
Message Size Limit: 3145728 Bytes
Transport Method: http
HTTP address(es): https://tools.cisco.com/its/service/oddce/services/DDCEService
Other address(es): default
Periodic configuration info message is scheduled every 1 day of the month at 09:15
Periodic inventory info message is scheduled every 1 day of the month at 09:00
Alert-group
------------------------
crash
diagnostic
environment
inventory
Syslog-Pattern
------------------------
APF-.-WLC_.*
.*
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
Purpose
Displays all the entitlements in use. Additionally, it
shows the associated licensing certificates, compliance
status, UDI, and other details.
Displays the detailed debug output.
Displays the license usage information.
Displays the summary of all the active licenses.
Severity
------------
debug
minor
warning
normal
Severity
------------
warning
major
Configuration Examples for Smart Licensing
105