Show Ipv6 Traffic - Cisco MDS 9000 series Command Reference Manual

show ipv6 traffic

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show ipv6 traffic
To display IPv6 protocol statistics for the system, use the show ipv6 traffic command.
Syntax Description interface
gigabitethernet
slot/port
mgmt 0
port-channel number
vsan vsan-id
Defaults None.
Command Modes EXEC mode.
Command History Release
3.1(0)
Usage Guidelines None.
Cisco MDS 9000 Family Command Reference
22-164
show ipv6 traffic [interface {gigabitethernet slot/port | mgmt 0 | port-channel number | vsan
vsan-id}]
Displays the IP interface status and configuration.
Displays a Gigabit Ethernet interface slot and port number.
Displays the management interface.
Dispalsy the PortChannel interface. The range is 1 to 256.
Displays a IPFC VSAN interface and specifies the VSAN ID. The range is
1 to 4093.
Modification
This command was introduced.
Chapter 22 Show Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x