Snmp-Server Enable Traps L2Redundancy - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.3.28 snmp-server enable traps l2redundancy

Indicates whether traps that are related to the layer 2 redundancy features of
the switch will be sent. The HiPER-Ring and the Redundant Coupling will tell
you with these traps when the main line has failed or returned.
May be enabled or disabled.
Default: enabled.
Default
enabled
Format
snmp-server enable traps l2redundancy
Mode
Global Config
no snmp-server enable traps l2redundancy
U
This command disables layer 2 redundancy traps for the entire switch.
Format
no snmp-server enable traps l2redundancy
Mode
Global Config
86
4.3 Management Commands
CLI L2B
Release 4.0 11/07