Configuring Traps - Hirschmann RS20 Reference Manual

Diagnostics
7.7.4

Configuring Traps

 Select generate Trap, if the device is to create a trap as soon as the
position of a signal contact changes when function monitoring is active.
Figure 56: Signal Contact Dialog
The Signal Contact dialog contains 1 tab ("Signal contact 1") if the device has
1 signal contact.
The Signal Contact dialog contains 2 tabs ("Signal contact 1" and "Signal
contact 2") if the device has 2 signal contacts.
Buttons

Button Meaning
Set Transfers the changes to the volatile memory (RAM) of the device. To
permanently save the changes afterwards, you open the
Settings:Load/Save
Table 127:Buttons
RM GUI L2E
Release 8.0 05/2013
dialog and click "Save".
7.7 Signal contact
Basic
203