Snmp-Server Enable Traps Chassis - Hirschmann RS20 Reference Manual

CLI Commands: Base

4.3.27 snmp-server enable traps chassis

Configures whether traps that are related to the chassis functionality of the
switch will be sent. These functions include the signal contacts, the ACA,
warnings about the temperature, changes in the module map, addition or
removal of SFP modules, power failure and the LLDP and SNTP features.
May be enabled or disabled.
Default: enabled.
Default
enabled
Format
snmp-server enable traps chassis
Mode
Global Config
no snmp-server enable traps chassis
U
This command disables chassis traps for the entire switch.
Format
no snmp-server enable traps chassis
Mode
Global Config
CLI L2B
Release 4.0 11/07
4.3 Management Commands
85