Figure 3-2: Display Screen And Touch Control - Teledyne t100 Operation Manual

Getting Started
ATTENTION
30

Figure 3-2: Display Screen and Touch Control

The front panel liquid crystal display screen includes touch control. Upon analyzer start-
up, the interface shows a splash screen and other initialization indicators before the
main display appears, similar to Figure 3-2 above (may or may not display a Fault
alarm). The LEDs on the display screen indicate the Sample, Calibration and Fault
states; also on the screen is the gas concentration field (Conc), which displays real-time
readouts for the primary gas and for the secondary gas if installed. The display screen
also shows what mode the analyzer is currently in, as well as messages and data
(Param). Along the bottom of the screen is a row of touch control buttons; only those
that are currently applicable will have a label. Table 3-2 provides detailed information
for each component of the screen.
COULD DAMAGE INSTRUMENT AND VOID WARRANTY
Do not use hard-surfaced instruments such as pens to touch the control
buttons.
Teledyne API - T100 UV Fluorescence SO Analyzer
2
06807F DCN7335