Table of Contents
Advertisement
UDB-9000 Universal Deck Box - UDB-9000-M (Portable) and UDB-9000-MR (Rack Mount) Configurations
5. Touch Set Remote for remote transmit power level setting.
An information window temporarily opens indicating that the remote
modem settings are being updated. When complete, the update is
confirmed, and then the Set Remote button becomes unavailable for that
remote transmit power level selection only. If the update is not confirmed,
a no response indication is displayed in the window.
Checking the Baud Rate, Transmit Power Level
and Firmware Version of a Remote Modem
To check the baud rate, transmit power level and firmware version of a remote
modem:
1. Touch the tab in the Modem Config screen for the modem to be
checked.
2. On the tab, touch Get Settings.
An information window temporarily opens indicating that the remote
modem settings are being updated on the tab. When complete, receipt
of the settings is confirmed. When the window closes, the remote modem
baud rate and transmit settings are displayed on the tab along with the
firmware version of the remote modem. The Set Remote buttons also
become unavailable for these selections only. If the update is not
confirmed, a no response indication is displayed in the window.
A confirmed update also makes the
More Info button available.
Touching this button opens the
Remote Additional Info pop-up
which displays additional
information about the remote
modem as shown in Figure 4-33.
For information about the
displayed parameters, refer to the
"Acoustic Telemetry Modems
User's Manual."
3. Touch the X mark to close the
Remote Additional Info pop-up.
4
Operation using the Touch Screen Display
Figure 4-33 Remote Additional
Info Pop-Up
Configuring and Checking a Remote Modem
4-25
Advertisement
Table of Contents
