Advanced Settings - Panasonic KX-NS500 Pc Programming Manual

DSP IP Setting—DSP Card-1/DSP Card-2—MAC Address
Indicates the MAC address of the DSP card (reference only).
Value Range
00:00:00:00:00:00–FF:FF:FF:FF:FF:FF
Maintenance Console Location
27.1 Network Service—[1] IP Address/Ports—Basic Settings

Advanced Settings

LAN Port—Speed & Duplex
Specifies the connection mode of the main port. The connection is made in 100Mbps/half duplex when Auto
negotiation fails.
Value Range
Auto: Automatic mode selection
100M-Full: 100 Mbps/full duplex
100M-Half: 100 Mbps/half duplex
10M-Full: 10 Mbps/full duplex
10M-Half: 10 Mbps/half duplex
Maintenance Console Location
27.1 Network Service—[1] IP Address/Ports—Advanced Settings
LAN Port—MDI/MDIX
Specifies the cable type connected to the LAN port.
Value Range
Auto, MDI, MDIX
Maintenance Console Location
27.1 Network Service—[1] IP Address/Ports—Advanced Settings
Port Mirroring—Packet kind for mirroring
Specifies the types of packets used for port mirroring. This setting is available at Installer level only.
Value Range
Disable
LAN (All packets)
LAN (Data packets PBX)
LAN (Voice packets)
Maintenance Console Location
27.1 Network Service—[1] IP Address/Ports—Advanced Settings
27.1 Network Service—[1] IP Address/Ports
PC Programming Manual 981