System Control-Program Update-Plug And Update - Panasonic KX-NS500 Pc Programming Manual

5.1.3 System Control—Program Update—Plug and Update
5.1.3 System Control—Program Update—Plug and Update
The Plug and Update feature allows IP-PTs to be automatically updated to the latest software version when
they are registered to the PBX. When Plug and Update is enabled, the version number of the system software
stored on the Main unit is compared to the system software currently in the IP-PT, after the IP-PT has been
registered to the PBX. If the software on the Main unit is newer, it is downloaded to the IP-PT. By default, Plug
and Update is set to Off for Main unit.
1.
In Plug & Update, select On for each to enable this feature.
2.
Click OK.
68 PC Programming Manual