Edge-Core ECS4110-28T Management Manual page 955

E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ip arp inspection trust
Console(config-if)#
This command displays the global configuration settings for ARP
show ip
Inspection.
arp inspection
configuration
C
OMMAND
Privileged Exec
E
XAMPLE
Console#show ip arp inspection configuration
ARP inspection global information:
Global IP ARP Inspection status : disabled
Log Message Interval
Log Message Number
Need Additional Validation(s)
Additional Validation Type
Console#
This command shows the trust status and ARP Inspection rate limit for
show ip
ports.
arp inspection
interface
S
YNTAX
show ip arp inspection interface [interface]
interface
C
OMMAND
Privileged Exec
E
XAMPLE
Console#show ip arp inspection interface ethernet 1/1
Port Number
-------------
Eth 1/1
Console#
M
ODE
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
M
ODE
Trust Status
--------------------
Trusted
– 955 –
| General Security Measures
C 25
HAPTER
: 10 s
: 1
: Yes
: Destination MAC address
Rate Limit (pps)
------------------------------
150
ARP Inspection