Copy - Edge-Core ECS4110-28T Management Manual

| System Management Commands
C 21
HAPTER
File Management

copy

R C
ELATED OMMANDS
dir (742)
whichboot (743)
This command moves (upload/download) a code image or configuration file
between the switch's flash memory and an FTP/TFTP server. When you
save the system code or configuration settings to a file on an FTP/TFTP
server, that file can later be downloaded to the switch to restore system
operation. The success of the file transfer depends on the accessibility of
the FTP/TFTP server and the quality of the network connection.
S
YNTAX
copy file {file | ftp | running-config | startup-config | tftp}
copy running-config {file | ftp | startup-config | tftp}
copy startup-config {file | ftp | running-config | tftp}
copy tftp {add-to-running-config | file | https-certificate |
public-key | running-config | startup-config}
add-to-running-config - Keyword that adds the settings listed in
the specified file to the running configuration.
file - Keyword that allows you to copy to/from a file.
ftp - Keyword that allows you to copy to/from an FTP server.
https-certificate - Keyword that allows you to copy the HTTPS
secure site certificate.
public-key - Keyword that allows you to copy a SSH key from a
TFTP server. (See "Secure Shell" on page
running-config - Keyword that allows you to copy to/from the
current running configuration.
startup-config - The configuration used for system initialization.
tftp - Keyword that allows you to copy to/from a TFTP server.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
The system prompts for data required to complete the copy command.
◆
The destination file name should not contain slashes (\ or /), and the
◆
maximum length for file names is 32 characters for files on the switch
or 127 characters for files on the server. (Valid characters: A-Z, a-z,
0-9, ".", "-")
The switch supports only two operation code files, but the maximum
◆
number of user-defined configuration files is 16.
– 738 –
853.)