Edge-Core ECS4110-28T Management Manual page 762

| System Management Commands
C 21
HAPTER
Event Logging
logging trap
E
XAMPLE
Console(config)#logging on
Console(config)#
R C
ELATED OMMANDS
logging history (760)
logging trap (762)
clear log (763)
This command enables the logging of system messages to a remote server,
or limits the syslog messages saved to a remote server based on severity.
Use this command without a specified level to enable remote logging. Use
the no form to disable remote logging.
S
YNTAX
logging trap [level level]
no logging trap [level]
level - One of the syslog severity levels listed in the table on
page 760. Messages sent include the selected level through level 0.
D S
EFAULT ETTING
Disabled
Level 7
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Using this command with a specified level enables remote logging and
◆
sets the minimum severity level to be saved.
Using this command without a specified level also enables remote
◆
logging, but restores the minimum severity level to the default.
E
XAMPLE
Console(config)#logging trap 4
Console(config)#
– 762 –