Edge-Core ECS4110-28T Management Manual page 856

| Authentication Commands
C 24
HAPTER
Secure Shell
ip ssh
authentication-
retries
ip ssh server
This command configures the number of times the SSH server attempts to
reauthenticate a user. Use the no form to restore the default setting.
S
YNTAX
ip ssh authentication-retries count
no ip ssh authentication-retries
count – The number of authentication attempts permitted after
which the interface is reset. (Range: 1-5)
D S
EFAULT ETTING
3
C M
OMMAND ODE
Global Configuration
E
XAMPLE
Console(config)#ip ssh authentication-retires 2
Console(config)#
R C
ELATED OMMANDS
show ip ssh (860)
This command enables the Secure Shell (SSH) server on this switch. Use
the no form to disable this service.
S
YNTAX
[no] ip ssh server
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
The SSH server supports up to eight client sessions. The maximum
◆
number of client sessions includes both current Telnet sessions and
SSH sessions.
The SSH server uses DSA or RSA for key exchange when the client first
◆
establishes a connection with the switch, and then negotiates with the
client to select either DES (56-bit) or 3DES (168-bit) for data
encryption.
◆ You must generate DSA and RSA host keys before enabling the SSH
server.
– 856 –