Edge-Core ECS4110-28T Management Manual page 1068

| Congestion Control Commands
C 31
HAPTER
Automatic Traffic Control Commands
snmp-server
enable port-traps
atc broadcast-
alarm-fire
snmp-server
enable port-traps
atc broadcast-
control-apply
This command sends a trap when broadcast traffic exceeds the upper
threshold for automatic storm control. Use the no form to disable this trap.
S
YNTAX
[no] snmp-server enable port-traps atc broadcast-alarm-fire
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration (Ethernet)
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc broadcast-alarm-fire
Console(config-if)#
R C
ELATED OMMANDS
auto-traffic-control alarm-fire-threshold (1065)
This command sends a trap when broadcast traffic exceeds the upper
threshold for automatic storm control and the apply timer expires. Use the
no form to disable this trap.
S
YNTAX
[no] snmp-server enable port-traps atc broadcast-control-apply
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration (Ethernet)
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc broadcast-control-apply
Console(config-if)#
R C
ELATED OMMANDS
auto-traffic-control alarm-fire-threshold (1065)
auto-traffic-control apply-timer (1061)
– 1068 –