Edge-Core ECS4110-28T Management Manual page 1341

E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv med-cap
Console(config-if)#
This command configures an LLDP-MED-enabled port to advertise its
lldp med-tlv
network policy configuration. Use the no form to disable this feature.
network-policy
S
YNTAX
D
EFAULT
Enabled
C
OMMAND
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
This option advertises network policy configuration information, aiding in
the discovery and diagnosis of VLAN configuration mismatches on a port.
Improper network policy configurations frequently result in voice quality
degradation or complete service disruption.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv network-policy
Console(config-if)#
This command enables the transmission of SNMP trap notifications about
lldp notification
LLDP changes. Use the no form to disable LLDP notifications.
S
YNTAX
D
EFAULT
Enabled
C
OMMAND
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
◆
[no] lldp med-tlv network-policy
S
ETTING
M
ODE
U
SAGE
[no] lldp notification
S
ETTING
M
ODE
U
SAGE
This option sends out SNMP trap notifications to designated target
stations at the interval specified by the
command. Trap notifications include information about state changes in
the LLDP MIB (IEEE 802.1AB), or organization-specific LLDP-EXT-DOT1
and LLDP-EXT-DOT3 MIBs.
– 1341 –
| LLDP Commands
C 41
HAPTER
lldp notification-interval