Hostname; Banner Information; Table 54: Banner Commands - Edge-Core ECS4110-28T Management Manual

| System Management Commands
C 21
HAPTER

Banner Information

hostname

B I
ANNER NFORMATION
This command specifies or modifies the host name for this device. Use the
no form to restore the default host name.
S
YNTAX
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Global Configuration
E
XAMPLE
Console(config)#hostname RD#1
Console(config)#
These commands are used to configure and manage administrative
information about the switch, its exact data center location, details of the
electrical and network circuits that supply the switch, as well as contact
information for the network administrator and system manager. This
information is only available via the CLI and is automatically displayed
before login as soon as a console or telnet connection has been
established.

Table 54: Banner Commands

Command Function
banner configure Configures the banner information that is displayed
before login
banner configure Configures the Company information that is displayed
company by banner
banner configure Configures the DC Power information that is displayed
dc-power-info by banner
banner configure Configures the Department information that is
department displayed by banner
banner configure Configures the Equipment information that is
equipment-info displayed by banner
banner configure Configures the Equipment Location information that is
equipment-location displayed by banner
banner configure ip-lan Configures the IP and LAN information that is
displayed by banner
banner configure Configures the LP Number information that is
lp-number displayed by banner
– 718 –
Mode
GC
GC
GC
GC
GC
GC
GC
GC