Table 196: Show Ethernet Cfm Linktrace-Cache - Display Description - Edge-Core ECS4110-28T Management Manual

| CFM Commands
C 42
HAPTER
Link Trace Operations
clear ethernet cfm
linktrace-cache
show ethernet cfm
linktrace-cache
When using the command line or web interface, the source MEP used
◆
by to send a link trace message is chosen by the CFM protocol.
However, when using SNMP, the source MEP can be specified by the
user.
E
XAMPLE
This example sends a link trace message to the specified MEP with a
maximum hop count of 25.
Console#linktrace ethernet dest-mep 2 md voip ma rd ttl 25
Console#
This command clears link trace messages logged on this device.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#clear ethernet cfm linktrace-cache
Console#
This command displays the contents of the link trace cache.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show ethernet cfm linktrace-cache
Hops MA IP / Alias
Forwarded
---- -------------- ----------------------- ----------------- ----------- -----
2 rd 192.168.0.6
Not Forwarded
Console#

Table 196: show ethernet cfm linktrace-cache - display description

Field Description
Hops The number hops taken to reach the target MEP.
MA Name of the MA to which this device belongs.
IP/Alias IP address or alias of the target device's CPU.
Forwarded Shows whether or not this link trace message was forwarded. A
message is not forwarded if received by the target MEP.
Ingress MAC MAC address of the ingress port on the target device.
Egress MAC MAC address of the egress port on the target device.
– 1380 –
Ingress MAC Ing. Action Relay
Egress MAC Egr. Action
00-12-CF-12-12-2D ingOk Hit