Edge-Core ECS4110-28T Management Manual page 488

| Basic Administration Protocols
C 14
HAPTER
Remote Monitoring
C RMON
ONFIGURING
S S
TATISTICAL AMPLES
Click History.
5.
Figure 275: Showing Collected RMON History Samples
Use the Administration > RMON (Configure Interface - Add - Statistics)
page to collect statistics on a port, which can subsequently be used to
monitor the network for common errors and overall traffic rates.
CLI R
EFERENCES
"Remote Monitoring Commands" on page 815
◆
C U
OMMAND SAGE
If statistics collection is already enabled on an interface, the entry must
◆
be deleted before any changes can be made.
◆ The information collected for each entry includes:
input octets, packets, broadcast packets, multicast packets, undersize
packets, oversize packets, CRC alignment errors, jabbers, fragments,
collisions, drop events, and frames of various sizes.
P
ARAMETERS
These parameters are displayed:
Port – The port number on the switch.
◆
◆ Index - Index to this entry. (Range: 1-65535)
Owner - Name of the person who created this entry. (Range: 1-127
◆
characters)
W I
EB NTERFACE
To enable regular sampling of statistics on a port:
Click Administration, RMON.
1.
Select Configure Interface from the Step list.
2.
Select Add from the Action list.
3.
– 488 –