W
I
EB
NTERFACE
To statically assign an interface to an IPv6 multicast service:
Click Multicast, MLD Snooping, MLD Member.
1.
Select Add Static Member from the Action list.
2.
Select the VLAN that will propagate the multicast service, specify the
3.
interface attached to a multicast service (through an MLD-enabled
switch or multicast router), and enter the multicast IP address.
Click Apply.
4.
Figure 350: Assigning an Interface to an IPv6 Multicast Service
To show the static interfaces assigned to an IPv6 multicast service:
Click Multicast, MLD Snooping, MLD Member.
1.
Select Show Static Member from the Action list.
2.
Select the VLAN for which to display this information.
3.
Figure 351: Showing Static Interfaces Assigned to an IPv6 Multicast Service
– 601 –
C
15
HAPTER
MLD Snooping (Snooping and Query for IPv6)
| Multicast Filtering