Mode Command; Show Garp Timer - Edge-Core ECS4110-28T Management Manual

C
OMMAND
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
GVRP cannot be enabled for ports set to Access mode using the
mode
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#switchport gvrp
Console(config-if)#
This command shows the configuration for bridge extension commands.
show bridge-ext
D
EFAULT
None
C
OMMAND
Privileged Exec
C
OMMAND
See
description of the displayed items.
E
XAMPLE
Console#show bridge-ext
Maximum Supported VLAN Numbers
Maximum Supported VLAN ID
Extended Multicast Filtering Services : No
Static Entry Individual Port
VLAN Version Number
VLAN Learning
Configurable PVID Tagging
Local VLAN Capable
Traffic Classes
Global GVRP Status
GMRP
Console#
This command shows the GARP timers for the selected interface.

show garp timer

S
YNTAX
M
ODE
U
SAGE
command.
S
ETTING
M
ODE
U
SAGE
"Displaying Bridge Extension Capabilities" on page 127
show garp timer [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
– 1153 –
| VLAN Commands
C 37
HAPTER
GVRP and Bridge Extension Commands
for a
: 4094
: 4094
: Yes
: 2
: IVL
: Yes
: No
: Enabled
: Disabled
: Disabled
switchport