Edge-Core ECS4110-28T Management Manual page 1336

| LLDP Commands
C 41
HAPTER
lldp dot3-tlv poe
lldp med-location
civic-addr
This command configures an LLDP-enabled port to advertise its Power-
over-Ethernet (PoE) capabilities. Use the no form to disable this feature.
S
YNTAX
[no] lldp dot3-tlv poe
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
This option advertises Power-over-Ethernet capabilities, including
◆
whether or not PoE is supported, currently enabled, if the port pins
through which power is delivered can be controlled, the port pins
selected to deliver power, and the power class.
This command only applies to the ES4110-28P/52P.
◆
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp dot3-tlv poe
Console(config-if)#
This command configures an LLDP-MED-enabled port to advertise its
location identification details. Use the no form to restore the default
settings.
S
YNTAX
lldp med-location civic-addr [[country country-code] |
[what device-type] | [ca-type ca-value]]
no lldp med-location civic-addr [[country] | [what] | [ca-type]]
country-code – The two-letter ISO 3166 country code in capital
ASCII letters. (Example: DK, DE or US)
device-type – The type of device to which the location applies.
0 – Location of DHCP server.
1 – Location of network element closest to client.
2 – Location of client.
ca-type – A one-octet descriptor of the data civic address value.
(Range: 0-255)
ca-value – Description of a location. (Range: 1-32 characters)
– 1336 –