Edge-Core ECS4110-28T Management Manual page 1333

This command configures an LLDP-enabled port to advertise port-based
lldp dot1-tlv
protocol VLAN information. Use the no form to disable this feature.
proto-vid
S
YNTAX
D
EFAULT
Enabled
C
OMMAND
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
This option advertises the port-based protocol VLANs configured on this
interface (see
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-vid
Console(config-if)#
This command configures an LLDP-enabled port to advertise its default
lldp dot1-tlv pvid
VLAN ID. Use the no form to disable this feature.
S
YNTAX
D
EFAULT
Enabled
C
OMMAND
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
The port's default VLAN identifier (PVID) indicates the VLAN with which
untagged or priority-tagged frames are associated (see the
native vlan
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv pvid
Console(config-if)#
[no] lldp dot1-tlv proto-vid
S
ETTING
M
ODE
U
SAGE
"Configuring Protocol-based VLANs" on page
[no] lldp dot1-tlv pvid
S
ETTING
M
ODE
U
SAGE
command).
– 1333 –
| LLDP Commands
C 41
HAPTER
1178).
switchport