Time-Range; Absolute - Edge-Core ECS4110-28T Management Manual

This command specifies the name of a time range, and enters time range

time-range

configuration mode. Use the no form to remove a previously specified time
range.
S
YNTAX
[no] time-range name
name - Name of the time range. (Range: 1-16 characters)
D S
EFAULT
None
C
OMMAND
Global Configuration
C
OMMAND
This command sets a time range for use by other functions, such as
◆
Access Control Lists.
A maximum of seven rules can be configured for a time range.
◆
E
XAMPLE
Console(config)#time-range r&d
Console(config-time-range)#
R C
ELATED
Access Control Lists (969)
This command sets the time range for the execution of a command. Use

absolute

the no form to remove a previously specified time.
S
YNTAX
absolute start hour minute day month year
[end hour minutes day month year]
absolute end hour minutes day month year
no absolute
hour - Hour in 24-hour format. (Range: 0-23)
minute - Minute. (Range: 0-59)
day - Day of month. (Range: 1-31)
month - january | february | march | april | may | june | july |
august | september | october | november | december
year - Year (4-digit). (Range: 2009-2037)
D S
EFAULT
None
C
HAPTER
ETTING
M
ODE
U
SAGE
OMMANDS
ETTING
– 783 –
| System Management Commands
21
Time Range