show ethernet cfm
maintenance-points
local
This command displays the maintenance points configured on this device.
S
YNTAX
show ethernet cfm maintenance-points local
{mep [domain domain-name | interface interface |
level level-id] | mip [domain domain-name | level level-id]}
mep – Displays only local maintenance end points.
mip – Displays only local maintenance intermediate points.
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
interface – Displays CFM status for the specified interface.
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
level-id – Maintenance level for this domain. (Range: 0-7)
D
S
EFAULT
ETTING
None
C
M
OMMAND
ODE
Privileged Exec
C
U
OMMAND
SAGE
Use the mep keyword with this command to display the MEPs
◆
configured on this device as DSAPs through the
command.
Using the mip keyword with this command to display the MIPs
◆
generated on this device by the CFM protocol when the mip-creation
method is set to either "default" or "explicit" by the
domain
command or the
E
XAMPLE
This example shows all MEPs configured on this device for maintenance
domain rd.
Console#show ethernet cfm maintenance-points local mep
MPID MD Name
Level Direct VLAN Port
---- ---------------- ----- ------ ---- -------- --------- -----------------
1 rd
Console#
– 1363 –
C
HAPTER
ma index name
command.
CC Status MAC Address
0 UP
1 Eth 1/ 1 Enabled
| CFM Commands
42
Defining CFM Structures
ethernet cfm mep
ethernet cfm
00-12-CF-3A-A8-C0