Configure - Edge-Core ECS4110-28T Management Manual

E
XAMPLE
In this example, the show history command lists the contents of the
command history buffer:
Console#show history
Execution command history:
2 config
1 show history
Configuration command history:
4 interface vlan 1
3 exit
2 interface vlan 1
1 end
Console#
The ! command repeats commands from the Execution command history
buffer when you are in Normal Exec or Privileged Exec Mode, and
commands from the Configuration command history buffer when you are in
any of the configuration modes. In this example, the !2 command repeats
the second command in the Execution history buffer (config).
Console#!2
Console#config
Console(config)#
This command activates Global Configuration mode. You must enter this

configure

mode to modify any settings on the switch. You must also enter Global
Configuration mode prior to enabling some of the other configuration
modes, such as Interface Configuration, Line Configuration, and VLAN
Database Configuration. See
page 702.
D S
EFAULT ETTING
None
C M
OMMAND
Privileged Exec
E
XAMPLE
Console#configure
Console(config)#
R C
ELATED OMMANDS
end (715)
"Understanding Command Modes" on
ODE
– 713 –
| General Commands
C 20
HAPTER