This command displays status information for all configured rings, or for a
show erps
specified ring
S
YNTAX
show erps [domain ring-name] [statistics]
domain - Keyword to display ERPS ring configuration settings.
ring-name - Name of a specific ERPS ring. (Range: 1-32 characters)
statistics - Keyword to display ERPS ring statistics.
C
OMMAND
Privileged Exec
E
XAMPLE
This example displays a summary of all the ERPS rings configured on the
switch.
Console#show erps
ERPS Status
Number of ERPS Domains
Domain
------------ --- ------- --- --- --------- ---------- ------------ ---------
r&d
Console#
Table 141: show erps - summary display description
Field
Node Information
ERPS Status
Number of ERPS Domains Shows the number of ERPS rings configured on the switch.
Domain
ID
Enabled
Ver
MEL
Ctrl VLAN
M
ODE
: Enabled
: 1
ID
Enabled Ver MEL Ctrl VLAN State
1 Yes
2
1
W/E
Interface Port State Local SF Local FS Local MS MEP
---- --------- ---------- -------- -------- -------- ---- ---
West Eth 1/ 1
Blocking
East Eth 1/ 3
Forwarding No
Description
Shows whether ERPS is enabled on the switch.
Displays the name of each ring followed by a brief list of status
information
ERPS ring identifier used in R-APS messages.
Shows if the specified ring is enabled.
Shows the ERPS version.
The maintenance entity group (MEG) level providing a
communication channel for ring automatic protection switching
(R-APS) information.
Shows the Control VLAN ID.
– 1145 –
| ERPS Commands
C
36
HAPTER
Type
1 Idle
RPL Owner
No
No
No
No
No
Revertive
Yes
RPL
Yes
No