Show Ipv6 Mld Snooping - Edge-Core ECS4110-28T Management Manual

| Multicast Filtering Commands
C 40
HAPTER
MLD Snooping
clear ipv6 mld
snooping statistics
show ipv6 mld
snooping
C U
OMMAND SAGE
This command only clears entries learned though MLD snooping. Statically
configured multicast address are not cleared.
E
XAMPLE
Console#clear ipv6 mld snooping groups dynamic
Console#
This command clears MLD snooping statistics.
S
YNTAX
clear ipv6 mld snooping statistics [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id - VLAN identifier (Range: 1-4094)
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#clear ipv6 mld snooping statistics
Console#
This command shows the current MLD Snooping configuration.
S
YNTAX

show ipv6 mld snooping

C M
OMMAND ODE
Privileged Exec
E
XAMPLE
The following shows MLD Snooping configuration information
Console#show ipv6 mld snooping
Service Status
Querier Status
Robustness
Query Interval
Query Max Response Time
– 1270 –
: Disabled
: Disabled
: 2
: 125 sec
: 10 sec