Edge-Core ECS4110-28T Management Manual page 771

E
XAMPLE
Console(config)#sntp server 10.1.0.19
Console(config)#sntp poll 60
Console(config)#sntp client
Console(config)#end
Console#show sntp
Current Time:
Poll Interval: 60
Current Mode: unicast
SNTP Status : Enabled
SNTP Server 137.92.140.80 0.0.0.0 0.0.0.0
Current Server: 137.92.140.80
Console#
R C
ELATED OMMANDS
sntp server (772)
sntp poll (771)
show sntp (772)
This command sets the interval between sending time requests when the
sntp poll
switch is set to SNTP client mode. Use the no form to restore to the
default.
S
YNTAX
sntp poll seconds
no sntp poll
seconds - Interval between time requests.
(Range: 16-16384 seconds)
D S
EFAULT ETTING
16 seconds
C M
OMMAND
Global Configuration
E
XAMPLE
Console(config)#sntp poll 60
Console#
R C
ELATED OMMANDS
sntp client (770)
C
HAPTER
Dec 23 02:52:44 2002
ODE
– 771 –
| System Management Commands
21
Time