Edge-Core ECS4110-28T Management Manual page 1269

E
The following shows how to configure port 1 as a multicast router port within
VLAN 1:
This command adds a port to an IPv6 multicast group. Use the no form to
ipv6 mld snooping
remove the port.
vlan static
S
D
None
C
Global Configuration
E
This command clears multicast group information dynamically learned
clear ipv6 mld
through MLD snooping.
snooping groups
dynamic
S
C
Privileged Exec
XAMPLE
Console(config)#ipv6 mld snooping vlan 1 mrouter ethernet 1/1
Console(config)#
YNTAX
[no] ipv6 mld snooping vlan vlan-id static ipv6-address interface
vlan - VLAN ID (Range: 1-4094)
ipv6-address - An IPv6 address of a multicast group.
(Format: X:X:X:X::X)
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
S
EFAULT ETTING
M
OMMAND ODE
XAMPLE
Console(config)#ipv6 mld snooping vlan 1 static FF00:0:0:0:0:0:0:10C ethernet
1/6
Console(config)#
YNTAX
clear ipv6 mld snooping groups dynamic
M
OMMAND ODE
– 1269 –
| Multicast Filtering Commands
C 40
HAPTER
MLD Snooping