Edge-Core ECS4110-28T Management Manual page 1434

28/52-port gigabit ethernet layer 2+ switch
Hide thumbs Also See for ECS4110-28T:
Table of Contents

Advertisement

| IP Interface Commands
C
46
HAPTER
Interface Address Configuration and Utilities
ipv6 address
This command configures an IPv6 global unicast address and enables IPv6
on an interface. Use the no form without any arguments to remove all IPv6
addresses from the interface, or use the no form with a specific IPv6
address to remove that address from the interface.
S
YNTAX
[no] ipv6 address ipv6-address[/prefix-length]
ipv6-address - A full IPv6 address including the network prefix and
host address bits.
prefix-length - A decimal value indicating how many contiguous bits
(from the left) of the address comprise the prefix (i.e., the network
portion of the address).
D
S
EFAULT
ETTING
No IPv6 addresses are defined
C
M
OMMAND
ODE
Interface Configuration (VLAN)
C
U
OMMAND
SAGE
All IPv6 addresses must be according to RFC 2373 "IPv6 Addressing
Architecture," using 8 colon-separated 16-bit hexadecimal values. One
double colon may be used in the address to indicate the appropriate
number of zeros required to fill the undefined fields.
To connect to a larger network with multiple subnets, you must
configure a global unicast address. This address can be manually
configured with this command, or it can be automatically configured
using the
ipv6 address autoconfig
If a link-local address has not yet been assigned to this interface, this
command will assign the specified static global unicast address and also
dynamically generate a link-local unicast address for the interface. (The
link-local address is made with an address prefix of FE80 and a host
portion based the switch's MAC address in modified EUI-64 format.)
If a duplicate address is detected, a warning message is sent to the
console.
E
XAMPLE
This example specifies a full IPv6 address and prefix length.
Console(config)#interface vlan 1
Console(config-if)#ipv6 address 2001:DB8:2222:7272::72/96
Console(config-if)#end
Console#show ipv6 interface
VLAN 1 is up
IPv6 is enabled
Link-Local Address:
fe80::b60e:dcff:fe34:9608%1/64
Global Unicast Address(es):
2001:db8:2222:7272::72/96, subnet is 2001:db8:2222:7272::/96
– 1434 –
command.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecs4110-28pEcs4110-52tEcs4110-52p

Table of Contents