Edge-Core ECS4110-28T Management Manual page 843

Use this command to name a group of security server hosts. To remove a
aaa group server
server group from the configuration list, enter the no form of this
command.
S
YNTAX
D
EFAULT
None
C
OMMAND
Global Configuration
E
XAMPLE
Console(config)#aaa group server radius tps
Console(config-sg-radius)#
This command adds a security server to an AAA server group. Use the no
server
form to remove the associated server from the group.
S
YNTAX
D
EFAULT
None
C
OMMAND
Server Group Configuration
C
OMMAND
◆
◆
[no] aaa group server {radius | tacacs+} group-name
radius - Defines a RADIUS server group.
tacacs+ - Defines a TACACS+ server group.
group-name - A text string that names a security server group.
(Range: 1-64 characters)
S
ETTING
M
ODE
[no] server {index | ip-address}
index - Specifies the server index.
(Range: RADIUS 1-5, TACACS+ 1)
ip-address - Specifies the host IP address of a server.
S
ETTING
M
ODE
U
SAGE
When specifying the index for a RADIUS server, that server index must
already be defined by the
When specifying the index for a TACACS+ server, that server index
must already be defined by the
– 843 –
| Authentication Commands
C 24
HAPTER
radius-server host command.
tacacs-server host
AAA
command.