Edge-Core ECS4110-28T Management Manual page 1315

clear mvr6 statistics
show mvr6
E
XAMPLE
Console#clear mvr6 groups dynamic
Console#
Use this command to clear the MVR6 statistics.
S
YNTAX
clear mvr6 statistics [interface {ethernet unit/port |
port-channel channel-id | vlan vlan-id}]
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id (Range: 1-4094)
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
If the interface option is not used then all MVR6 statistics are cleared.
Otherwise using the interface option will only clear the MVR6 statistics of
the specified interface.
E
XAMPLE
The following shows how to clear all the MVR6 statistics:
Console#clear mvr6 statistics
Console#
This command shows information about MVR domain settings, including
MVR operational status, the multicast VLAN, the current number of group
addresses, and the upstream source IP address.
S
YNTAX
show mvr6 [domain domain-id]
domain-id - An independent multicast domain. (Range: 1-5)
D S
EFAULT ETTING
Displays configuration settings for all MVR domains.
C M
OMMAND ODE
Privileged Exec
– 1315 –
| Multicast Filtering Commands
C 40
HAPTER
MVR for IPv6