Table 135: Address Table Commands - Edge-Core ECS4110-28T Management Manual

34
mac-address-table
aging-time
A T
DDRESS
These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or
setting the aging time.

Table 135: Address Table Commands

Command Function
mac-address-table Sets the aging time of the address table
aging-time
mac-address-table Maps a static address to a port in a VLAN
static
clear Removes any learned entries from the
mac-address-table forwarding database
dynamic
show Displays entries in the bridge-forwarding
mac-address-table database
show Shows the aging time for the address table
mac-address-table
aging-time
show Shows the number of MAC addresses used and
mac-address-table the number of available MAC addresses
count
This command sets the aging time for entries in the address table. Use the
no form to restore the default aging time.
S
YNTAX
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Aging time. (Range: 10-844 seconds; 0 to disable aging)
D S
EFAULT ETTING
300 seconds
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
The aging time is used to age out dynamically learned forwarding
information.
– 1085 –
C
ABLE OMMANDS
Mode
GC
GC
PE
PE
PE
PE