Table 190: Lldp Med Location Ca Types - Edge-Core ECS4110-28T Management Manual

D S
EFAULT ETTING
Not advertised
No description
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
Use this command without any keywords to advertise location
◆
identification details.
◆ Use the ca-type to advertise the physical location of the device, that is
the city, street number, building and room information. The address
location is specified as a type and value pair, with the civic address (CA)
type being defined in RFC 4776. The following table describes some of
the CA type numbers and provides examples.

Table 190: LLDP MED Location CA Types

CA Type Description
1 National subdivisions (state, canton, province)
2 County, parish
3 City, township
4 City division, borough, city district
5 Neighborhood, block
6 Group of streets below the neighborhood level
18 Street suffix or type
19 House number
20 House number suffix
21 Landmark or vanity address
26 Unit (apartment, suite)
27 Floor
28 Room
Any number of CA type and value pairs can be specified for the civic
address location, as long as the total does not exceed 250 characters.
For the location options defined for device-type, normally option 2 is
◆
used to specify the location of the client device. In situations where the
client device location is not known, 0 and 1 can be used, providing the
client device is physically close to the DHCP server or network element.
– 1337 –
| LLDP Commands
C 41
HAPTER
CA Value Example
California
Orange
Irvine
West Irvine
Riverside
Exchange
Avenue
320
A
Tech Center
Apt 519
5
509B