Process Cpu - Edge-Core ECS4110-28T Management Manual

| SNMP Commands
C 22
HAPTER
Additional Trap Commands

process cpu

This command sets an SNMP trap based on configured thresholds for CPU
utilization. Use the no form to restore the default setting.
S
YNTAX
process cpu {rising rising-threshold | falling falling-threshold}
no process cpu {rising | falling}
rising-threshold - Rising threshold for CPU utilization alarm
expressed in percentage. (Range: 1-100)
falling-threshold - Falling threshold for CPU utilization alarm
expressed in percentage. (Range: 1-100)
D S
EFAULT ETTING
Rising Threshold: 90%
Falling Threshold: 70%
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Once the rising alarm threshold is exceeded, utilization must drop beneath
the falling threshold before the alarm is terminated, and then exceed the
rising threshold again before another alarm is triggered.
E
XAMPLE
Console(config)#process cpu rising 80
Console(config)#process cpu falling 60
Console#
R C
ELATED OMMANDS
show process cpu (729)
– 814 –