Displaying Dynamic Or Local Arp Entries - Edge-Core ECS4110-28T Management Manual

D D
ISPLAYING YNAMIC
L ARP
OR OCAL
E
NTRIES
Figure 413: Configuring Static ARP Entries
To display static entries in the ARP cache:
Click IP, ARP.
1.
Select Configure Static Address from the Step List.
2.
Select Show from the Action List.
3.
Figure 414: Displaying Static ARP Entries
Use the IP > ARP (Show Information) page to display dynamic or local
entries in the ARP cache. The ARP cache contains static entries, and entries
for local interfaces, including subnet, host, and broadcast addresses.
However, most entries will be dynamically learned through replies to
broadcast messages.
CLI R
EFERENCES
◆ "show arp" on page 1431
W I
EB NTERFACE
To display all dynamic entries in the ARP cache:
Click IP, ARP.
1.
Select Show Information from the Step List.
2.
Click Dynamic Address.
3.
– 689 –
| General IP Routing
C 18
HAPTER
Address Resolution Protocol