Edge-Core ECS4110-28T Management Manual page 1098

| Spanning Tree Commands
C 35
HAPTER
spanning-tree
mst configuration
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Bridge priority is used in selecting the root device, root port, and
designated port. The device with the highest priority (i.e., lower numeric
value) becomes the STA root device. However, if all devices have the same
priority, the device with the lowest MAC address will then become the root
device.
E
XAMPLE
Console(config)#spanning-tree priority 40000
Console(config)#
This command changes to Multiple Spanning Tree (MST) configuration
mode.
D S
EFAULT ETTING
No VLANs are mapped to any MST instance.
The region name is set the switch's MAC address.
C M
OMMAND ODE
Global Configuration
E
XAMPLE
Console(config)#spanning-tree mst configuration
Console(config-mstp)#
R C
ELATED OMMANDS
mst vlan (1101)
mst priority (1100)
name (1102)
revision (1102)
max-hops (1100)
– 1098 –