Edge-Core ECS4110-28T Management Manual page 1345

E
XAMPLE
Note that an IP phone or other end-node device which advertises LLDP-
MED capabilities must be connected to the switch for information to be
displayed in the "Device Class" field.
Console#show lldp info remote-device
LLDP Remote Devices Information
Local Port Chassis ID
---------- ----------------- ----------------- -----------------------------
Eth 1/1 00-E0-0C-10-90-00 00-E0-0C-10-90-04
Eth 1/2 70-72-CF-5B-DA-D4 70-72-CF-5B-DA-D6
Console#show lldp info remote-device detail ethernet 1/1
LLDP Remote Devices Information Detail
---------------------------------------------------------------
Index : 4
Chassis Type : MAC Address
Chassis ID : FC-0A-81-B7-C7-E0
Port ID Type : MAC Address
Port ID : FC-0A-81-B7-C7-E1
Time To Live : 120 seconds
Port Description : Ethernet Port on unit 1, port 1
System Description : ECS3510-28P
System Capabilities : Bridge
Enabled Capabilities : Bridge
Management Address : 192.168.0.4 (IPv4)
Port VLAN ID : 1
Port and Protocol VLAN ID : VLAN
VLAN Name : VLAN 1 - DefaultVlan
Protocol Identity (Hex) : 88-CC
MAC/PHY Configuration/Status
Port Auto-neg Supported
Port Auto-neg Enabled
Port Auto-neg Advertised Cap (Hex) : 6C00
Port MAU Type
Remote Power via MDI
Remote power class
Remote power MDI supported
Remote power MDI enabled
Remote power pair controllable
Remote power pairs
Remote power classification
Link Aggregation
Link Aggregation Capable : Yes
Link Aggregation Enable
Link Aggregation Port ID : 0
Remote Max Frame Size : 1522
Console#
– 1345 –
C
HAPTER
Port ID System Name
2 - supported, enabled
: Yes
: Yes
: 16
: PSE
: Yes
: Yes
: No
: Spare
: Class1
: No
| LLDP Commands
41