Edge-Core ECS4110-28T Management Manual page 1304

| Multicast Filtering Commands
C 40
HAPTER
MVR for IPv6
mvr6
associated-profile
Table 182: Multicast VLAN Registration for IPv6 Commands (Continued)
Command Function
mvr6 vlan Specifies the VLAN through which MVR multicast data is
received
mvr6 immediate-leave Enables immediate leave capability
mvr6 type Configures an interface as an MVR receiver or source
port
mvr6 vlan group Statically binds a multicast group to a port
clear mvr6 groups Clears multicast group information dynamically learned
dynamic through MVR6
clear mvr6 statistics Clears the MVR statistics globally or on a per-interface
basis.
show mvr6 Shows information about MVR domain settings, including
MVR operational status, the multicast VLAN, the current
number of group addresses, and the upstream source IP
address
show mvr6 Shows the profiles bound the specified domain
associated-profile
show mvr6 interface Shows MVR settings for interfaces attached to the MVR
VLAN
show mvr6 members Shows information about the current number of entries
in the forwarding database, or detailed information about
a specific multicast address
show mvr6 profile Shows all configured MVR profiles
show mvr6 statistics Shows MVR protocol statistics for the specified interface PE
This command binds the MVR group addresses specified in a profile to an
MVR domain. Use the no form of this command to remove the binding.
S
YNTAX
[no] mvr6 domain domain-id associated-profile profile-name
domain-id - An independent multicast domain. (Range: 1-5)
profile-name - The name of a profile containing one or more MVR
group addresses. (Range: 1-21 characters)
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
MRV6 domains can be associated with more than one MVR6 profile. But
since MVR6 domains cannot share the group range, an MRV6 profile can
only be associated with one MVR6 domain.
– 1304 –
Mode
GC
IC
IC
IC
PE
PE
PE
PE
PE
PE
PE